Replacement D-Series Cutter (Ceramic)

Skip the sharpening queue with the VUNRO Replacement D Series Cutter, a pre sharpened ceramic cutter that restores razor sharp performance the moment you slide it in. Built for discerning groomers, it turns blade maintenance into a five second swap instead of days of downtime.

• Slide the old cutter out and the new one straight in, no tools and no waiting on sharpening turnaround.
• Pre sharpened ceramic edge delivers instant, consistent cutting without the uncertainty of resharpened results.
• Keeps you working through the day so you can serve more clients and protect your booking flow.
• Eliminates unpredictable sharpening costs and the frustration of blades out for service.

Compatible with VUNRO D Series blades and not intended for use with A5 blades. Keep a spare cutter on the bench and never lose a grooming day to a dull edge again.

• Start with a thoroughly brushed, clean and completely dry coat.
• Use gentle, consistent pressure, keeping the cutting edge parallel to the skin.
• Keep strokes smooth and steady; do not rush or press harder if the blade pulls.
• Clip with the natural direction of growth for an even trim. Clipping against growth produces a closer finish.
• Use appropriate scissors for precision detailing after clipping, especially with longer lengths.
• Check blade temperature frequently and allow cooling breaks for your pet's comfort.

Switch off and unplug the clipper before removing the blade. Keep the cutter aligned and follow the fitting demonstration. If you are unsure, stop and ask VUNRO for help.

VUNRO D-Series blades only. Select the matching blade number; this is not an A5 cutter.

Standard A5, #40/#50, wide A5, skip-tooth A5 and D-Series cutters are not all interchangeable. A cutter does not change the cutting length of the fixed blade it is fitted to.

Send us your blade details if you would like us to check the match.

No. This product is the replacement moving cutter for your VUNRO D-Series blade assembly, not a complete blade or clipper. Match the option to the blade you already own.

VUNRO D-Series blades only. Select the matching blade number; this is not an A5 cutter.

Check the number and system marked on your existing blade, then choose the matching option above. A replacement cutter does not change the cutting length of the fixed blade. If you are unsure, send VUNRO your blade details before ordering.

This SuperZirconia ceramic replacement cutter provides a hard, sharp moving edge for the matching VUNRO D-Series blade. Ceramic resists corrosion, but its teeth still need careful handling: avoid drops and impacts, and replace a cutter with chipped or damaged teeth. Keep the complete blade assembly clean and lubricated, and continue checking its temperature during use.

The cutter is supplied pre-sharpened. Switch off and unplug the clipper, remove the blade and follow the fitting demonstration for VUNRO D-Series. Check alignment before use. If you are unsure about fitting or tension, stop and ask VUNRO or a blade-service specialist for help.

With the clipper switched off and unplugged, brush away hair and debris after use. Clean and lubricate the blade assembly according to its care instructions, then dry it before storage. Check blade temperature during grooming and allow cooling breaks when needed.

Replace it if a tooth is chipped, cracked or broken. If cutting deteriorates after cleaning and correct lubrication, have the complete blade assembly checked: the fixed blade, alignment or tension may also need attention. Ask a specialist who works with ceramic cutters before attempting to restore the edge.

Inspect the teeth for damage and check that the cutter is correctly aligned and securely fitted. Do not use a blade with bent, chipped or broken teeth. If the blade is loose, binds or pulls, stop and have it checked rather than applying more pressure.

Store it clean and dry in a protective case or its packaging, with the teeth protected from knocks. Keep it away from moisture and loose metal tools. Follow the blade assembly's lubrication instructions before storage.

Securely contain the sharp edges so they cannot injure anyone; do not leave the cutter loose in a bin. Ask your local waste service how to dispose of sharp ceramic parts safely.

Not sure about the cutter, blade number or fitting? Contact VUNRO before ordering. For help planning a grooming kit, try the Grooming Adviser.