#40 / #50 Replacement A5 Cutter (Steel)

Your finest finishing blades feel it first when the edge softens, and the VUNRO #40 / #50 replacement A5 cutter in stainless steel is the moving blade that puts the bite back. It is ground to the tight #40 / #50 profile for surgical prep, paw pad work and the closest detail passes, and it fits without a trip to the sharpener.

• Tight #40 / #50 grind made for surgical prep, feet and ultra close detailing
• Stainless steel edge arrives keen and cuts crisply from the first stroke
• Returns a worn fine blade to full sharpness right at the bench
• Consistent close cutting so detail and finishing stay uniform

Made to fit VUNRO A5 type clipper blades. Keep a spare fine cutter on hand and your detail work never has to pause.

• Start with a thoroughly brushed, clean and completely dry coat.
• Use gentle, consistent pressure, keeping the cutting edge parallel to the skin.
• Keep strokes smooth and steady; do not rush or press harder if the blade pulls.
• Clip with the natural direction of growth for an even trim. Clipping against growth produces a closer finish.
• Use appropriate scissors for precision detailing after clipping, especially with longer lengths.
• Check blade temperature frequently and allow cooling breaks for your pet's comfort.

Switch off and unplug the clipper before removing the blade. Keep the cutter aligned and follow the fitting demonstration. If you are unsure, stop and ask VUNRO for help.

Dedicated steel cutter for #40 / #50 A5 blades.

Standard A5, #40/#50, wide A5, skip-tooth A5 and D-Series cutters are not all interchangeable. A cutter does not change the cutting length of the fixed blade it is fitted to.

Send us your blade details if you would like us to check the match.

No. This product is the replacement moving cutter for your #40 / #50 A5 blade assembly, not a complete blade or clipper. Match the option to the blade you already own.

Dedicated steel cutter for #40 / #50 A5 blades.

Check the number and system marked on your existing blade, then choose the matching option above. A replacement cutter does not change the cutting length of the fixed blade. If you are unsure, send VUNRO your blade details before ordering.

This stainless steel moving cutter replaces the worn cutter in the matching #40 / #50 A5 blade assembly. It is supplied pre-sharpened. Keep it clean, dry and lubricated to help maintain smooth cutting and protect it during storage.

The cutter is supplied pre-sharpened. Switch off and unplug the clipper, remove the blade and follow the fitting demonstration for #40 / #50 A5. Check alignment before use. If you are unsure about fitting or tension, stop and ask VUNRO or a blade-service specialist for help.

With the clipper switched off and unplugged, brush away hair and debris after use. Clean and lubricate the blade assembly according to its care instructions, then dry it before storage. Check blade temperature during grooming and allow cooling breaks when needed.

If the blade pulls or cuts unevenly after cleaning and lubrication, have the complete blade assembly checked. A blade-service specialist can assess the cutter, fixed blade, alignment and tension, and advise whether sharpening or replacement is appropriate. Stop using a cutter with damaged teeth.

Inspect the teeth for damage and check that the cutter is correctly aligned and securely fitted. Do not use a blade with bent, chipped or broken teeth. If the blade is loose, binds or pulls, stop and have it checked rather than applying more pressure.

Store it clean and dry in a protective case or its packaging, with the teeth protected from knocks. Keep it away from moisture and loose metal tools. Follow the blade assembly's lubrication instructions before storage.

Securely contain the sharp edges so they cannot injure anyone; do not leave the cutter loose in a bin. Ask your local waste service how to dispose of sharp metal parts safely.

Not sure about the cutter, blade number or fitting? Contact VUNRO before ordering. For help planning a grooming kit, try the Grooming Adviser.